Ametek Jofra ETC-125 A, Reference Manual

Page: 36 / 86

123943 08 2019-04-12 9
Caution…
About the use:
•
Do not use the instrument if the fan is out of order.
•
Before cleaning the calibrator, you must switch it off,
allow it to cool down and remove all cables.
About the well, insertion tube and grid plate:
•
The well and the insertion tube must be clean before
use.
•
Do not pour any form of liquids into the well. It might
damage the well or cause a hazard.
•
Scratches and other damage to the insertion tubes
should be avoided by storing the insertion tubes
carefully when not in use.
•
The insertion tube must never be forced into the well.
The well could be damaged as a result, and the
insertion tube may get stuck.
•
The insertion tube must always be removed from the
calibrator after use.
The humidity in the air may cause corrosion oxidation
on the insertion tube inside the instrument. There is a
risk that the insertion tube may get stuck if this is
allowed to happen.
Note…
The product liability only applies if the instrument is subject
to a manufacturing defect. This liability becomes void if the
user fails to follow the maintenance instructions set out in
this manual or uses unauthorised spare parts.