Ametek iPac, User Manual

Page: 13 / 44

16040-101 Rev. J 13
Instrument Setup
(continued)
Charging the iPac Pachymeter
WARNING: CARE MUST BE TAKEN TO ARRANGE THE CABLES FOR THE
ACCESSORIES SUCH THAT THEY DO NOT PRESENT A TRIPPING HAZARD TO THE
EXAMINER OR A DANGER TO THE PATIENT.
WARNING: POSITION THIS INSTRUMENT SO THAT IT IS NOT DIFFICULT TO OPERATE
THE DISCONNECTION DEVICE (PLUG).
CAUTION: USE ONLY THE SUPPLIED CHARGER PROVIDED WITH THE UNIT. IT IS
RECOMMENDED THAT THE IPAC BE ATTACHED TO ITS CHARGER (OR CHARGING
BASE) WHEN NOT IN USE TO ENSURE PROPER OPERATION.
CAUTION: DO NOT ATTEMPT TO CHARGE THE IPAC OR POWER THE CHARGING
CRADLE USING THE USB PORT OF A COMPUTER OR DAMAGE TO THE IPAC OR
COMPUTER MAY OCCUR.
The iPac can be charged directly with the Charging Cradle or the A/C adaptor. In
either case, it is important to be sure that the Mini USB Plug is correctly oriented to the
Mini USB Port, either on the iPac or the Charging Cradle.
With a Charging Cradle
Note: Initially charge the unit for 10 hours.
Note: The Mini USB Port and the Mini USB Plug have a flat
side and a curved side. The flat side of the Plug has a
small rectangular cutout visible from the flat side. When
connecting the Plug to the Port, be sure that the flat side
of the Plug is lined up with the flat side of the Port.
CAUTION:
IF THE MINI USB PLUG IS NOT ALIGNED
PROPERLY WITH THE MINI USB PORT, THE PORT MAY BREAK
OFF AND THE PLUG MAY BECOME DAMAGED.
Note: It is important to initially charge the iPac Pachymeter
for the recommended period of time to ensure correct
operation.
Note:
The iPac comes with a mini USB port cap installed in the mini USB port hole.
This should remain in the iPac to help ensure the iPac properly sits on the cradle.
1. Plug the A/C Adaptor with Mini USB into an appropriately volted outlet.
2. Connect the Mini USB charging cord to the Charging Cradle.
3. Place the iPac on the Charging Cradle.
-continued-
Correct
Incorrect
Plug
Port
Plug
Port
With Charging
Cradle