manualshive.com logo in svg

Ametek IntelliPoint RF RNT Series, Assembly, Installation And Operating Instructions, Page: 31 / 90

Share
Download
Ametek IntelliPoint RF RNT Series Assembly, Installation And Operating Instructions Download Page 31

Troubleshooting

25

the vessel. Verify the CoteShield element extends at 

least 2” into the vessel and past wall build-up.

ii.  Extremely conductive coating on the sensing element. 

This may require changing the sensing element or 

electronics. Contact the factory for recommendations.

iii. Sensing element is touching vessel. A resistance 

reading of less than 10 ohms to ground (sensing 

element housing or tank) is usually due to a metal-to- 

metal short circuit. Verify that the sensing element 

is not touching any vessel structure.

c.  If the sensing element still shows resistance between 

terminals of less than 10K ohms, it is possible that 

moisture is present internal to the sensing element. It 

may be possible to dry the sensing element until the 

resistance increases to a value in excess of 10K ohms. 

However this is an indication the integrity of the sensing 

element has been compromised. Contact the factory for 

recommendations.

4.5 

Testing The Sensing Element (Continued)

1

 A digital ohmmeter will often produce a resistance measurement 

that is higher than the actual value.

Figure 4-1

Checking the Sensing Element

Summary of Contents for IntelliPoint RF RNT Series



























































































Reviews:

No comments