manualshive.com logo in svg

Ametek IntelliPoint RF RNT Series, Assembly, Installation And Operating Instructions, Page: 24 / 90

Share
Download
Ametek IntelliPoint RF RNT Series Assembly, Installation And Operating Instructions Download Page 24

RNTXX - IntelliPoint RF Series User's Manual

18

2.8.2 

IntelliPoint Calibration Mode change

The IntelliPoint was shipped in a calibration mode that was 

determined to meet the needs of the application for which it was 

originally sold. If, for some reason, the IntelliPoint is used on a 

different application, or for other reasons it is determined that 

a different calibration mode should be used, use the following 

procedure to make a calibration mode change.
Each IntelliPoint has 4 different Calibration Modes that are 

available, dependant on the model purchased.

2.8.3 

Available IntelliPoint calibration modes:

   

Standard Sensitivity systems (RL, RN, RT, RV model series prefix):

Mode 1: Auto-Cal 2 pF. 

This mode provides a 2 pF preload; alarm setpoint varies 

depending on material and coating deposit changes.
Mode 2: Fixed Cal 2 pF. 

This mode provides a 2 pF preload; alarm setpoint is locked to 

starting capacitance value recorded at system start-up.
Mode 3: Auto-Cal 10 pF. 

This mode provides a 10 pF preload; alarm setpoint varies 

depending on material and coating deposit changes.
Mode 4: Fixed Cal 10 pF. 

This mode provides a 10 pF preload; alarm setpoint is locked to 

starting capacitance value recorded at system start-up.

   

High Sensitivity systems (RH, RP model series prefix):

Mode 1: Auto-Cal 0.5 pF. 

This mode provides a 0.5 pF preload; alarm setpoint varies 

depending on material and coating deposit changes.
Mode 2: Fixed Cal 0.5 pF. 

This mode provides a 0.5 pF preload; alarm setpoint is locked 

to starting capacitance value recorded at system start-up.
Mode 3: Auto-Cal 2 pF. 

This mode provides a 2 pF preload; alarm setpoint varies 

depending on material and coating deposit changes.
Mode 4: Fixed Cal 2 pF. 

This mode provides a 2 pF preload; alarm setpoint is locked to 

starting capacitance value recorded at system start-up.

Summary of Contents for IntelliPoint RF RNT Series



























































































Reviews:

No comments