Ametek IntelliPoint RF RGL Series, Installation And Operating Instructions Manual

Page: 36 / 60

IntelliPoint RF RML Series Troubleshooting
28
5.12 Equipment Return
In order to provide the best service, any equipment being
returned for repair or credit must be pre-approved by the
factory.
In many applications, sensing elements are exposed to
hazardous materials.
• OSHA mandates that our employees be informed and
protected from hazardous chemicals.
• Material Safety Data Sheets (MSDS) listing the
hazardous materials to which the sensing element
has been exposed MUST accompany any repair.
• It is your responsibility to fully disclose all chemicals
and decontaminate the sensing element.
To obtain a Return Authorization Number (RA#), contact the
Service department at 1-800-527-6297 (US and Canada) or
+1-215-674-1234.
Please provide the following information:
• Model Number of Return Equipment
• Serial Number
• Original Purchase Order Number
• Process Materials to which equipment has been exposed.
• MSDS sheets for any hazardous materials
• Billing Address
• Shipping Address
• Purchase Order Number for Repairs
Please include a purchase order even if the repair is under
warranty. If repair is covered under warranty, you will not be
charged.
Ship equipment freight prepaid to:
AMETEK-DREXELBROOK.
205 KEITH VALLEY ROADzz
HORSHAM, PA 19044-1499
COD shipments will not be accepted.