GUPS 2400A
–107 Operation Manual
2-1
SECTION 2
INSTALLATION
2.1
Introduction
The Elgar Model GUPS 2400A-107 has been aligned, calibrated, and tested prior to shipment.
The instrument is ready for immediate use upon receipt. However, the following checks should
be made to ensure that the instrument was not damaged during shipment.
CAUTION!
The GUPS 2400A-107 weighs 75 pounds (34 kg) without the
battery pack. The battery pack adds an additional 48 pounds
(22 kg). A minimum two
–person lift is required!
WARNING
Hazardous voltages are present when operating this equipment.
Please read the SAFETY NOTICE on page ii prior to installation,
operation, or maintenance.
2.2
Unpacking and Inspection
Perform a visual inspection of the shipping container prior to accepting the package from the
carrier. If extensive damage is evident, a description of the damage should be noted on the
carrier's receipt and signed by the driver of the carrier agent.
If damage is not apparent until the instrument is unpacked, a claim for concealed damage
should be placed with the carrier. Check for shipping damage such as dents, scratches,
distortion, and damaged connectors. If the instrument or container(s) show signs of rough
handling, remove the covers from the instrument to ensure that the circuit boards are securely
in place and that no loose or broken components are evident.
In addition, the shipping container(s) and filler material should be saved for inspection. Forward
a report of damage to the Elgar Service Department. Elgar will provide instructions for repair or
replacement of the instrument.