Ametek 3050-DO, User Manual

Page: 14 / 46

Analyzer Name Configuration
The default name of the analyzer is 3050-n, where “n” is the address
of the analyzer.
If you have multiple analyzers, entering a name for
each analyzer you want to connect is recommended but not required.
Figure 9. Analyzer Name Configuration screens.
1. From the Main Menu screen, press the ENTER / MENU key to access
the Configuration Menu.
2. Use the left and/or right navigation arrows to locate the System Name
Configuration menu and press the ENTER / MENU key.
3. Use the screen keypad to enter the name(s) of your analyzer(s). The
keypad displays the characters as you enter them. For example, to
select the letter “E”, press the number “3” key twice. To enter the num-
ber “2” press the number “2” key four times “A, B, C, 2.”
14 | Model 3050 Moisture Analyzers Series