AMETEK/PRESTOLITE POWER ULTRA CHARGE, Owner'S Manual, Page: 23 / 70

193111-068
UC2000 CONTROL FEATURES
The charge cycle data will automatically scroll through
the display along with the charge cycle number. The 19
archive data items are described in detail below (see
Figure 7-2).
AMP HOURS RET The total ampere-hours returned
during the charge cycle. This
number includes ampere-hours
delivered to the battery during
the Verify, 0-80%, 80% to End,
and Equalize portions of the
charge cycle.
CHARGE TIME The total charging time of the
charge cycle. This number
includes the time of the Verify,
0-80%, 80% to End, and
Equalize portions of the charge
cycle.
80% TO END The time the battery was
charged from the 80% charged
point until DV/DT or VT
(depending on the control
setting) charge termination.
This time does not include any
equalize charging time that
may have been automatically
or manually selected.
BATTERY OCV The open circuit voltage of the
battery immediately before the
beginning of the charge cycle.
START AMPS The value of the current
delivered to the battery at the
start of the charge cycle.
START VOLTS The value of the battery
voltage (in volts/cell) of the
battery at the start of the
charge cycle.
FINISH AMPS The value of the charge current
delivered to the battery at the
end of the charge cycle.
FINISH VOLTS The value of the battery voltage
at the end of the charge cycle.
TERM The reason for charge cycle
termination. All possible codes
are listed below:
1-Charge Comp Normal Charge Complete
2-Low Current Low Current Error shutdown
3-Manual Stop Manual stop
4-Battery Dis Battery disconnected while
charging
5-<80 Backup 0-80% Back-up Timer Error
shutdown.
7-Cooling Int CDAC function
8-CDAC Rej CDAC Battery Rejection
9-Curve Error Charger Output Curve Error
shutdown
11-Unbal Line Unbalanced Input Line Error
shutdown
12-Didt Rising Current/Falling Voltage
Error shutdown
13-Lvsd Low Charging Voltage Error
shutdown
14-Ahsd Excessive AH Returned Error
Shutdown
15-BID Read BID Error Shutdown
EQUALIZE TIME The time of the equalize portion
of the charge cycle. Equalize
can be automatically or manually
selected.
START TIME The time at the start of the charge
cycle (Military format).
END TIME The time at the end of the charge
cycle. Includes the equalize time
if it was automatically or manually
selected (am/pm format).
TRUCK I.D. The Truck I.D. number of the
truck that the battery was
discharged in prior to the charge
cycle. Requires Prestolite Truck
and Battery Identification
Modules (TID and BID).
BATTERY I.D. The Battery I.D. number of the
battery that was charged in the
charge cycle. Requires Prestolite
Battery Identification Module
(BID).
7-6 March 31, 2005