Installation Guide
5 - 1
Thermal Imaging System
NIR-B Borescope
Electrical Auto Retract
MECHANICAL
INSTALLATION
SEQUENCE
5
Fig. 5-1
1)
Attach the supplied front bracket to the
prefabricated support frame using M20 bolts.
It is recommended that the support frame be
made height adjustable (Minimum 200 mm / 8 in)
for ease of installation.
See installation drawing Sheet 2 for mounting
details.
Fig. 5-2
2)
Attach the main body section to the bracket by
resting the axis bar within the U sections of the
bracket ensuring the body section sits between
the bracket uprights.
Fig. 5-3
3)
Once seated, unscrew the M16 bolts and nut
out as far as possible without completely
removing them.
