Ametek Land LSP-HD Series, Installation Manual

Page: 12 / 40

Page 6
Installation Guide LSP-HD Mountings & Accessories
5)
Orientation of notch on connector
View inside rear of connector
When re-assembling the connector,
make sure that the terminals are
orientated so that the locating notch
in the connector is in the position
shown in the illustrations.
6) Reposition the lid of the connector shell, ensuring the thin rubber seal is
seated correctly on the lid.
7) Tighten both of the metal threaded metal clamp rings onto the connector
body to complete the re-assembly.
The cable can now be fitted to the Landscan LSP-HD Thermometer.