Radiological monitor MRS 110B-1 Manual
AMES d.o.o. Jamova 39, Ljubljana, Slovenia
9
2.3 SWITCHING BETWEEN MEASURING UNITS (cpm / µSv/h)
To switch between units, press SET, than use up or down arrows to select the
desired unit and confirm the selection with pressing SET again.
MRS 110B-1 gives the exact values of dose rate, measured in µSv/h, only for the
photon energy that was used as the calibration source. For all other photon
energies, the measuring error due to the energy nonlinearity of the GM tube must
be taken into the consideration.
2.4 SETTING THE ALARM LEVEL
To set the alarm level, press
“SET”
twice. After this, current alarm level is
displayed, which can be modified by pressing “up” or “down” arrows. Selection
of alarm value is confirmed by pressing
“SET”
again.
As the default alarm value, we recommend to set few times the background
value (e.g. 0,4 µSv/h).
If we do not confirm new value of alarm, MRS 110 B-1 after few seconds
automatically returns to the measuring mode.
2.5 SERIAL NUMBER
Serial number is displayed by pressing “up” arrow when in measuring mode.
2.6 TURNING THE INSTRUMENT OFF
MRS 110B-1 is switched off by pressing
OFF
key.
