Page 8
For technical questions, please call 1-888-866-5797.
Item 64017
Sa
F
ety
Opera
ti
O
n
Maintenance
Setup
Operating instructions
read the entire iMpOrtant SaFety inFOrMatiOn section
at the beginning of this manual including all text under
subheadings therein before set up or use of this product.
electrical shock can cause death or injury! neVer tOucH
exposed conductors of electricity
.
General Operating instructions
reL/inruSH
1� Press the
reL/inruSH
button
once to enter relative measurement
mode and store a reference value�
2� Take additional measurements to
display difference between measured
value and reference value�
3� Hold
reL/inruSH
button for two or
more seconds to enter inrush mode�
note:
Relative measurement mode can
only be used in manual range mode�
Manual range
The Meter’s default range is
autO
� To select manual range, press
ran
� Each press
of the button increases the range� Hold the
ran
button to return to auto-range�
note:
Manual range cannot be used while measuring frequency�
Frequency and Duty cycle Measurements
1� While working with voltage or
current ranges, press the
Hz%
button one time to measure the
frequency of the voltage or current�
2� Press the
Hz%
button twice to
measure the duty cycle of the voltage
or current� The range is set to manual�
3� Press the
Hz%
button a third
time to return to normal voltage
or current measurement�
note:
Frequency and duty cycle
modes cannot be used while in
minimum or maximum value mode�
Minimum and Maximum Value Measurements
1� Press the
Min/MaX
button one
time to measure the maximum
value at any range�
2� Press the
Min/MaX
button
two times to measure the
minimum value at any range�
3� Press the
Min/MaX
button three times
to display difference between maximum
and minimum measurements�
4� Hold the
Min/MaX
button
for one or more seconds to
return to normal mode�
note:
The Meter is automatically set to
manual range mode when measuring
minimum or maximum value�
note:
Frequency and duty cycle modes
cannot be used while in minimum
and maximum value mode�
