background image

Page 4

For technical questions, please call 1-888-866-5797.

Item 63985

Specifications

Temperature Range

-58°F to 1022°F  (-50°C to 550°C)

Temperature Accuracy

(@ -58°F to 32°F) ± 7° 
(@ 33°F to 1022°F) ± 4° 
or ±2%, whichever is greater 

Response Time

< 1 second

Spot Size Ratio

12:1 (Distance:Spot Size)

Operating Temperature

32°F - 122°F

Operating Humidity

10 -  75% RH 

Storage Temperature

-4°F - 140°F

Storage Humidity

≤ 80% RH

Emissivity Range

0.1 - 1.0 (Preset to 0.95)

Battery

9V (sold separately)

Setup - Before Use:

  Read the ENTIRE IMPORTANT SAFETY INFORMATION section 

at the beginning of this manual including all text under 
subheadings therein before set up or use of this product.

Functions

Battery 

Cover

Laser 

Pointer

Infrared 

Lens

Display

Select 

Button

Backlight/ 

Laser 

Pointer 

Button

Up/Down 

Button

Trigger

LASER LIGHT

DO NOT STARE INTO BEAM

Max. Output: <1mW, Wavelength: 630-670nm

CLASS IIa LASER PRODUCT

18a

Manufacture Date:__________ , _____

This product complies with 21 CFR 1040.10 and 1040.11
Distributed by Harbor Freight Tools

3491 Mission Oaks Blvd.

Camarillo, CA 93011

63985

SAFETY

OPERA

TION

MAINTENANCE

SETUP

Summary of Contents for 63985









Reviews: