AmerTac ZHL110B, Owner'S Manual

Page: 3 / 20

Code Search
If your TV does not respond after you have tried all the
codes for your brand, or if your brand is not listed, try
searching for your code by following the steps below.
1. Manually turn on the TV to be controlled.
2. Press and Hold the POWER and MUTE buttons at
the same time until the red indicator remains on.
3. Release the buttons.
4. Press the CHANNEL UP button repeatedly (up to 300
times) until the device to be controlled changes channel.
The red indicator blinks off with each button press. If
you accidentally overshoot the code required, press
the CHANNEL DOWN button to backtrack through
the library until the device changes channel. Pressing
CHANNEL UP changes direction to forward again.
5. Press and release MUTE to install the code.
Note: Code Search starts from the currently stored 4
digit number.
Sleep Function
The SLEEP button operates the Sleep function of your
device providing it supports the Sleep function. Alter-
natively, you can enable the remote to turn off your TV
after a period of 1 to 99 minutes as shown below. This
feature works even if your TV does not have its own
Sleep function.
1. Press and Hold the POWER and MUTE buttons at
the same time until the red indicator remains on.
2. Release the buttons.
3. Press and release the SLEEP button (Note any previ-
ously set Sleep timer is canceled at this point and the
remote returns to normal operation).
4. Press and release the numeric buttons (01-99) for the
time required. The red indicator blinks off to indicate
button press acceptance and remains off after the
second button press.
5. The TV Sleep Timer is now set. Leave the Remote
pointing towards the TV with an unobstructed path.
To cancel the Sleep Timer, press and release the
POWER button or repeat Steps 1 and 2 above.
3