Amersham Biosciences MegaBACE 1000, Planning Manual, Page: 36 / 50

MegaBACE 500 and 1000 Planning Guide
●
p5-1
Chapter 5 Moving and reinstalling
the instrument
This chapter provides information about moving and reinstalling the
MegaBACE instrument. Topics include—
• Moving the instrument (section 5.1)
• Required parts for reinstalling the instrument (section 5.2)
• Connecting a new computer (section 5.3)
An Amersham Biosciences representative installs your MegaBACE instrument
after delivery. If you need to move the instrument, contact your Amersham
Biosciences representative before you move it.
Warning Do not connect or disconnect the power cords with the power on. Instead, turn
off the instrument and computer by following the instructions in the MegaBACE
instrument user’s documentation. Connecting or disconnecting the power cords
with the power on can damage the equipment and cause personal injury.
Important To avoid loose or lost connections, make sure the screws holding the connectors
in place are tight.
5.1 Moving the instrument
Warning The MegaBACE instrument weighs approximately 272 kg (600 lb). The instrument
requires adequate physical support. Never attempt to lift the instrument without
using proper equipment and trained personnel. Lifting the instrument without
proper support can cause severe or fatal injury.
Caution Do not attempt to move your MegaBACE instrument. Doing so will void your
warranty. Instead, contact MegaBACE System Technical Support to set up an
appointment. See Assistance in the preface for contact information.
If you need to move your MegaBACE instrument, review chapters 2 through 4
for information on selecting the new location, as well as the nitrogen pressure
and electrical power requirements for your instrument. Make sure you have
all the required parts for reinstallation (section 5.2).
5.2 Required parts for reinstalling the instrument
Warning
Do not install the instrument and computer yourself. Improper installation can
cause damage to these components and personal injury.
Make sure you have the following components and parts for reinstalling the
instrument.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com