Cleaning Glass Surfaces
Figure 11
Cleaning Carpets
To Remove Stains from Carpet
How to Clean with the Accessories
(cont.)
Figure 11
10
To clean the entire carpet surface, follow these steps:
To clean glass, use the window squeegee as
follows:
• Attach the floor cloth to the brush (rectangular or triangular). (Figure 9)
• Press the steam switch. (Figure 3)
• Slowly move the brush without applying any pressure.
• Wrap the floor cloth around the brush again with a clean part facing the carpet.
• Fit the steam nozzle onto the grip. (Figure 6)
• Press the steam switch. (Figure 3)
• Direct a jet of steam across the stained surface of the carpet.
• Have a clean cloth ready to remove the dirt as it gets loosened away from the surface
of the material.
• Press the steam switch.
• Gently slide the squeegee over the glass with brush
and its steam holes facing towards the surface.
• Remove stubborn dirt with the ribbed edge of the
rubber on the upper part of the accessory.
• Switch the steam off.
• Remove the dirty water from the glass using the
ribbed edge of the rubber on the upper part of the
accessory.
• Dry carefully with an absorbent cloth, such as the
one supplied.
Important:
It is always necessary, especially in winter, to pre-heat the window panes
before cleaning them. To do this, pass the large brush with the steam
engaged over the window at a distance of about 4 inches from the surface.
Attention:
Egg white stains can, under the effect of the steam, become fixed
onto the fabric.
Important:
As a general rule, when cleaning delicate materials, adjust the steam level
to its minimum setting. Before starting, check the quality of the carpet
(color fastness and heat resistance) by directing a jet of steam in a hidden
corner. Be particularly careful when cleaning velvets.