Americana Outdoors, Inc.
20
Navajo Installation Guide
STEP 11
Fit corner cap
(I)
over gutters
(F)
at any corner of
the shelter. Attach using (6) #8 x
1/2”
screws
(AA)
:
(2) through the top, (2) through the bottom, and (2)
on the inside through the pre
-
drilled holes.
Repeat to install all corner caps
(I)
.
STEP 12
If optional downspout kit was received with your order,
you may not have received scupper
(L)
. Follow the
separate downspout assembly instructions attached.
Determine the desired location to drain water from
gutter
(F)
. Cut a hole no bigger than
2”
diameter in
the bottom of the gutter. Alternatively, drill several
small holes in a rectangular pattern no bigger than
2”
x
3”.
Apply a generous bead of caulk around the top
flange of scupper
(L)
. Attach the scupper to
gutter
(F)
using (2) #8 x
1/2”
screws
(AA)
.
Repeat for any remaining scuppers
(L)
.
11
12
ASSEMBLY COMPLETED
•
Touch up paint has been supplied with the shelter to cover minor scratches or bolt and screw
heads. Use a template to achieve a good finish and minimize over
-
spray.
•
Be sure to sweep or brush all metal shavings off the shelter and leave the shelter in a clean
condition to help prevent the rusting or staining of the surface finish.