FLASHLIGHT 1 and 1 UL
FLASHLIGHT 2 and 2 UL
FLASHLIGHT 1
(STANDARD, UL & FL MODELS)
PITCHING INSTRUCTIONS
PACKAGE INCLUDES:
Tent body with attached Rain Fly, 1 NR Joint Rear Pole, 2 Vertical Poles, Guy Cords, Stakes, 1 Pole/Stake Bag and Tent Stuff Sack.
NOTE:
If you’re carrying trekking poles and want to
drop 6oz of weight, leave the vertical poles at home.
Simply insert the handle end of the pole into the
awning peak and put the trekking pole tip into the
grommet.
STEP 2:
Assemble rear pole and insert in grommets.
Attach the two H-Clips on the tent to NR Joint on pole.
STEP 1:
Find an even piece of ground; be sure area
is clear of debris. Layout your tent as shown. Stake
the 4 corners (circled).
STEP 3:
Assemble vertical poles. Insert the rounded
end of the pole into the sleeve located under the
awning at the peak of the tent. Insert the bottom of
the pole into the grommet.
STEP 4:
Now that the vertical pole is installed, stake
out the front awning (circled). Repeat steps 3 & 4 on
the other side of the tent.
STEP 5:
Stake out the rear vent on tent (circled) and
your tent should be completely set up.
Congratulations on the purchase of you new Sierra Designs Tent! In order to familiarize yourself with
your new tent, we recommend you “test pitch” it before embarking on your wilderness adventure.
NR Joint with H-Clip
must face down.
