Americana Outdoors, Inc.
17
Navajo Installation Guide
OPTIONAL
-
STANDING SEAM ROOF PANELS
Follow the steps below to install standing seam roof
panels
18”
wide
(Q)
or
8”
wide
(X)
. 18”
wide
(Q)
is shown.
STEP S1
Begin roof panel
(Q)
installation with the longest
panel. Set the panel on the shelter and line up the
center of the panel lock at the pointed end with the
center of tie block
(D)
and the center of purlin
(C)
.
Fit the roof panel
(Q)
into ridge cap
(E)
and match
the overhang from purlin
(C)
with the dimension
shown on the provided manufacturer
’
s drawing.
Keep the bottom end of the panel parallel with
purlin
(C)
.
STEP S2
With the roof panel
(Q)
held in the correct position
as described in Step S1, attach the bottom end to
purlin
(C)
using #12 x
1
-
1/4”
screws
(BB)
, (3) per
panel. Attach the top end to ridge cap
(F)
using #8 x
1/2”
screws
(AA)
, (3) per panel.
S1
S2
SIDE VIEW
Panel cut one way
Panel cut two ways