American TIM-900, Installation And Use Manual

Page: 18 / 40

To confirm the PRESET
value, press and hold
down the AUTO key until
the TIM-900 displays:
As long as the message AUTO blinks,
it is not yet possible to start a new
automatic dispensing.
If the trigger is completely pulled,
when released, it does not remain
locked in open position but it closes
again thus interrupting the
dispensing.
The blinking message AUTO
indicates that the phase for the
selection of the desired value is still
in progress, but that you have not
yet entered the AUTO mode by
confirming the displayed value.
Selected value.
Reset Batch Total.
The TIM-900 allows the operator to use
the most frequently used PRESET values
without having to set them by means of
the numeric keys.
In particular, the TIM-900 stores:
* The last PRESET value "AUTO LAST".
* Five different PRESET values "AUTO 1 -
AUTO 5".
The AUTO LAST value is automatically
updated each time a new PRESET value
is set by means of the keypad. The last
value used replaces the previous one in
the memory.
The PRESET "AUTO 1… AUTO 5" values
can be freely set and modified
according to the procedure indicated in
paragraph G2.
If the unit is off, type RESET
to re-start it.
The TIM-900 displays:
Last dispensing
carried out.
Press AUTO.
The TIM-900 displays the
PRESET value stored in
AUTO LAST.
Warning
L
I T
Selecting a PRESET value
AUTO
message
not blinking
Non-Resettable Total.
18