American TIM-900, Installation And Use Manual

Page: 11 / 40

E
ng
lis
h
This paragraph describes the necessary operations to be carried out when the
TIM-900 is installed for the first time on a new system or to replace an existing
nozzle with the TIM-900.
The shut-off valve is necessary to ensure a safe and correct installation and
maintenance of the TIM-900 without requiring to make the whole system
unserviceable.
The structure and complexity of the part of the system before the above
mentioned shut-off valve (rigid or flexible power lines, pumps, tanks, valves, etc.)
as well as the possible presence of the flexible hose reel can be freely chosen by
the Installer as they do not influence the maintenance of the TIM-900.
Warning
The TIM-900 has been designed to
be used as a component of a
centralized system for the
distribution of oils and other
industrial fluids, which must be
manufactured and installed by
specialized personnel in
compliance with the standards
relevant to such a pressurized
system.
To explain the installation and
maintenance operations relevant
to the TIM-900 refer to the
following diagram which shows a
typical installation, as regards the
components located right
upstream any "dispensing outlet"
of the TIM-900.
1.Distribution system
lines.
2.Shut-off valve.
3.Flexible hose
for reel entry.
4.Reel.
5.Flexible hose.
6.Nozzle.
Installing the TIM-900
E
Requirements of the system
E1
11