American TIM-900, Installation And Use Manual

Page: 14 / 40

D E
Three different types of extensions can
be installed on the nozzle TIM-900:
• ADJUSTABLE extension;
• RIGID extension;
• FLEXIBLE extension.
All of them are equipped with an
automatic dripless valve.
All extensions are equipped with a rigid
ending part (external 12 mm, 3/8"G
nut) suitable for being easily connected
to the TIM-900 without using any
sealant.
• Remove the plug from outlet A (3/8”G).
• Make sure that gasket B on the nut is in
its seat.
• Lubricate the gasket and its seat.
• Tighten end D on TIM-900 by means of
two wrenches;
while the first one on outlet A blocks
the TIM-900, the second one tightens
nut C of end D.
Before locking nut C orientate valve E.
An improper tightening of the
extension may cause it to become
loose thus endangering persons or
things.
Tighten the ring nut with a torque
wrench setting at 3.5 Kg per metre.
Warning
• Fit the rubber cover of the swivel into
the flexible hose, in the direction
indicated in the figure, making it slide
over the male thread of the hose.
• Apply a thread sealant to the male
threads of the flexible hose.
• Tighten the swivel completely by
means of two wrenches.
• Make the rubber cover slide towards
the valve until it goes into the specially
provided seat, located on the swivel.
Mounting the extension on the TIM-900
E5
Mounting the TIM-900
E6
14
A B
C