background image

American Weigh Scales

AMW

-DISC User’s Manual 300 x 0.1g

Thank you for purchasing the American Weigh Disc Scale. Please 

read all operating instructions carefully before use. This electronic 

scale is a precision instrument. With normal care and proper

 treatment, it will provide years of reliable service.

• Never load the scale with more than the maximum capacity.

• Avoid any exposure to extreme heat or cold. Your scale will work 

better when operated at normal room temperature. Always allow 

the scale to acclimate to surrounding temperature for at least one 

hour before use.

• Give your scale suffi cient warm up time. Usually 30-60 seconds 

before calibration to give the internal components a chance to 

stabilize.

• Keep your scale in a clean environment. Dust, dirt, moisture, 

vibration, air currents, and a close proximity to other electronic 

devices can cause an adverse effect on the reliability and accuracy 

of your scale. 

• Handle with care. Gently apply all items to be weighed onto tray 

top. Although this scale is designed to be quite durable, try to avoid 

rough treatment which can permanently damage the internal sen-

sor.

• Avoid shaking, dropping, or otherwise shocking the scale. This is 

a precision instrument and must be handled with extreme care.

•Only operate the scale on a stable, vibration free surface.

Summary of Contents for AMW-DISC







Reviews: