AMERICAN ULTRAVIOLET Lesco SUPERSPOT MK III, Technical Reference Manual, Page: 17 / 54

KMM1002P
15
4.0. Installation/Start Up
Before unpacking the system, inspect the shipping container for any damage such as
broken corners, deformity, holes and/or tears.
After unpacking the system, examine the equipment for any damage, i.e. unusual dents
or rattling of components.
Should there be any major damage immediately inform the shipping company and
AUV/LESCO.
Note:
Any delay in reporting damage may invalidate the claim. Make
sure to keep the shipping container in case there is a need to ship the system back to
AUV/LESCO.
4.1. System Components
Make sure all the following has been received:
* SUPERSPOT
MK III unit
* 100
-Watt Bulb
* Power
Cord
* Flexible
Lightguide (optional)
* Footswitch
with 6 foot lead and phone jack
* UV
Protection Goggles
* SUPERSPOT
MK III Manual
The MKIII must never be placed with the front panel facing downwards. This places the
cathode of the lamp in an unfavorable orientation and will cause premature bulb failure.
** CAUTION **
Do not cover chassis ventilation slots.
4.1.1. Footswitch and Goggles
Plug the footswitch into the phone jack receptacle at the rear panel. Plug the female end
of the power cord into the power cord receptacle at the rear panel. Plug the other end of
the cord into the appropriate outlet (110V power cord supplied with unit, unless otherwise
specified). Before turning the unit ON, make sure you are wearing UV protective
goggles/glasses and cotton or latex gloves.
** CAUTION **
Disconnect power from system or unplug system from wall or
VAC power source before connecting the footswitch adapter.