11
Installation
1. Remove 1H after 1A is closed.
There will be small amount of
water leakage during removal, so
put a piece of cloth, etc. under it.
2.Install 1C to 1A.
(It is recommended that tightening torque should be
10~15N.m (100~150kgf.cm))
■ Installation of E-bidet water supply hose
Installation
Figure
Seal washer
Water supply valve
T junction
Toilet Water
supply hose
Seal washer
Dual check valve
Connector
1H
1E
1C
1A
1B
1C
1A
1D
1B
1G
4. Install 1F to 1E.
3. Install 1E to 1C.
(It is recommended that tightening torque should be
10~15N.m (100~150kgf.cm))
1C
1E
1A
5. Install 1G to 1F.
6. Install 1H to 1E.
Note:Do not twist or deform flexi tail (1H)
.
1H
1E
1E
1F
1G
1D
