American Standard Milano CCAS1831 Page 3 Installation Manual Download

Page: 3 / 4

ASSEMBLE THE TANK

After the above installation, check level of the toilet.

CHECK LEVEL

FIX THE TOILET

Fix the toilet with the floor by using the screw with

the floor fixing set.

POSITION THE TOILET

Lift the toilet with the tank trim assembly, position

the toilet on the floor as picture shown.

Attach the water supply hose properly to the water

control valve on the tank and tighten snugly by hand.

Assemble the tank fittings.

FINISH THE TOILET

Dec.14

Rev.01

- 3 -

Silicone

Attach the water supply hose.

Install the seat & cover according to seat & cover

installation manual.

Apply a silicone putty along the intersecting

edge of the toilet base and floor, ensuring a

complete seal. Remove excess sealant.

Note: Silicone is not supplied in the packaging.

Using cement to fix the toilet is prohibited.

Summary of Contents for Milano CCAS1831

Page 1: ...cting our products products which have been the benchmark of fine quality for many years To help ensure that the installation process will proceed smoothly please read these instructions carefully bef...

Page 2: ...00cm Remark 108mm is for Korea 102mm is for China AIR VENT Size not smaller than 1 1 2 and must connected directiy to the waste pipe Insert the flange into the waste outlet pipe ensuring that the arro...

Page 3: ...hown Attach the water supply hose properly to the water control valve on the tank and tighten snugly by hand Assemble the tank fittings FINISH THE TOILET Dec 14 Rev 01 3 Silicone Attach the water supp...

Page 4: ...b Water pressure must not exceed 80 psi c Turn off the water supply valve If water continues to flow into the bowl until the water level falls to y a m s i r b e d r o d n a s e p i p w o l f r e v o...