H94
© 2008 AS America Inc.
EVOLUTION™ 5' X 36"
WHIRLPOOL AND BATHING POOL
HIGH GLOSS
Revised 3/06
NOTES:
BATH CAN BE INSTALLED EITHER ABOVE OR BELOW FLOOR LINE AS PIER, ISLAND, OR PENINSULA TYPE INSTALLATION.
SUPPORT OF BATH BY SUMP BEDDING. SUPPORT AND ENCLOSING MATERIAL BY OTHERS.
REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH WHIRLPOOL FOR ADDITIONAL INFORMATION.
■
OPTIONAL 3 WALL TILING BEAD. KIT No. TILE-BEAD AND APRON No. 5FT-APRON AVAILABLE AND MUST BE ORDERED
SEPARATELY.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL SUPPORTS.
IMPORTANT:
Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard Z124.1
These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided leaflet.
60 x 36 x 21-1/2 In.
(1524mm x 914 mm x 546mm)
75 Lbs. (34 Kg.)
800 Lbs. (363 Kg.)
87 Gal. (329 L.)
50 Gal. (189 L.)
41-1/4 x 26-1/4 In.
(1048mm x 667mm)
52-1/2 x 30 In. (1334mm x 762mm)
18-1/2 In. (470mm)
53 Lbs./Sq. Ft. (260 Kgs/Sq. m.)
GENERAL SPECIFICATIONS FOR 2771V WHIRLPOOL
INSTALLED SIZE
WEIGHT
WEIGHT w/WATER
GAL. TO OVERFLOW
MIN. OPERATING GAL.
BATHING WELL AT SUMP
BATHING WELL AT RIM
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA)
WHIRLPOOL ELECTRICAL SPECIFICATIONS
1.4 HP, 9.7 AMPS, 120V.
PUMP
60"
(1524mm)
36"
(914mm)
36"
(914mm)
3"
(76mm)
7-1/2"
(191mm)
6"
(152mm)
11"
(279mm)
13-3/4"
(349mm)
21-1/2"(H)
(546mm)
20"(C)
(508mm)
20-1/8"(A)
(511mm)
DIMENSIONS OF FIXTURES ARE NOMINAL AND MAY VARY WITHIN THE RANGE
OF TOLERANCES ESTABLISHED BY ANSI STANDARDS Z124.1 AND A112.19.7.
C/L
OF
OVERFLOW
CUT
OUT
IN FLOOR
FOR
DRAIN
3-1/4"
(83mm)
GENERAL SPECIFICATIONS FOR 2771V BATHING POOL
60 x 36 x 21-1/2 (1524 x 914 x 546mm)
60 Lbs. (27 Kg.)
785 Lbs. (356 Kg.)
87 Gal. (329 L.)
41-1/4 x 26-1/4 In. (1048 x 667mm)
52-1/2 x 30 In. (1334 x 762mm)
18-1/2 (470mm)
52 Lbs./Sq.Ft. (255 Kgs./Sq.m)
INSTALLED SIZE
WEIGHT
WEIGHT w/WATER
GAL. TO OVERFLOW
BATHING WELL AT SUMP
BATHING WELL AT RIM
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA)
