background image

WARRANTY

Page 4 of 4

Congratulations on purchasing an Oliveri bath. It represents 
the very best of Australian design ideas combined with 
well proven construction techniques. 

Oliveri products are 

manufactured to stringent Australian Standards, so you 
can be assured of safety and reliability.  

The Naples’ elegant, simple lines create the perfect 
balance of form and function. 

Manufactured from 

premium sanitary grade acrylic, the bath is durable and  
easy to clean. 

Additionally this bath base has been 

reinforced with a resin and fiberglass coating for superior 
sturdiness and durability.

Correct and proper use of your bath will ensure its  
long-lasting life. Please consult the Caring for Your Bath 
section of this manual for advice on cleaning and  
regular maintenance. 

Features

•  15 year warranty (see Oliveri.com.au for details) 
•  Manufactured to AS/NZ Standard 2023/1995
•  Steel rod reinforced rim
•  Double reinforced bath base

•  End waste position*

*Plug and waste not included

oliveri.com.au

Installation Instructions

Naples

Inset Bath With Tile Bead

THIS PRODUCT MUST BE INSTALLED BY A QUALIFIED TRADESPERSON

TF141a - Naples Inset Bath Installation Instructions / Page 1 of 4

PRE-INSTALLATION CHECKS

Inspect the acrylic surface of the bath for 
damage. Damage found after installation 
is not covered by the manufacturer’s 
warranty conditions. ANY CLAIMS FOR 
DAMAGE WILL NOT BE ACCEPTED AFTER 
INSTALLATION.

Protect your bath before and during 
installation. Scratches, cracks or other 
surface damage sustained during or after 
the installation are NOT COVERED BY 
WARRANTY.

Installation must only be carried out by a 
QUALIFIED TRADESMAN and in accordance 
with building regulations and any local 
authority requirements.

REMOVE PLASTIC FILM prior to installation.

We recommend that ‘pre-framing’ work be 
carried out when the product is on-site.

Do not install bath on foam.

STOP AND READ CAREFULLY

Oliveri Inset and Island Baths carry the following domestic warranty: 

15 years replacement product / 1 year labour 

Visit oliveri.com.au for full details.

Please note:

 

It is the responsibility of you and/or the installer 

to ensure that prior to installation:

•  the Product is not damaged; and
•  the Product has all its components.

Following installation of your Product, it is your responsibility 
to ensure all required maintenance is performed.

 If the product 

is incorrect or has a genuine manufacturing fault, it must NOT be 
installed. 

The Product can be returned, with proof of purchase, to 

the location it was purchased.

 

If you are a consumer as defined under the Australian Consumer 
Law, our goods come with guarantees that cannot be excluded under 
the Australian Consumer Law. You are entitled to a replacement or 
refund for a major failure and compensation for any other reasonably 
foreseeable loss or damage. You are also entitled to have the goods 
repaired or replaced if the goods fail to be of acceptable quality and 
the failure does not amount to a major failure.

The Oliveri Warranty is in addition to all your rights and remedies 
under the Australian Consumer Law.

The Oliveri Warranty only applies to you if you are the original 
purchaser of the Product. It is not transferable.

Subject to the terms contained in the full Oliveri Warranty 
document available at oliveri.com.au/service-and-warranty-au, 
where a genuine manufacturing defect arises in your Oliveri Inset 
or Island Bath during the course of normal domestic or commercial 
use within the warranty period, Oliveri will, at its election repair the 
defect or replace the Product. 

Your Oliveri Warranty does not cover scratching or any defect or 
damage caused, or partly caused by, or arising through: fair wear 
and tear (e.g. surface deterioration or scratching from cleaning etc.); 
incorrect storage or handling of the Oliveri Inset or Island Bath; 
failure to correctly install, use or maintain the Product or to follow 
any instructions or guidelines for installation, use or maintenance 
of the Oliveri Inset or Island Bath; faulty design of a system in 
which the Product is used; the use of the Oliveri Inset or Island Bath 
other than for any application specified on a quote or order form, 
price book or catalogue issued by Oliveri; the continued use of the 
Product after any defect becomes apparent or would have become 
apparent to a reasonably prudent operator or user; or any accident 
or act of God. 

This Warranty will be void if certain events arise including:
•  You are unable to provide proof of purchase or equivalent  

 

  documentation from an authorised retailer of your Oliveri Inset or  
  Island Bath;
• If:
  •  your Oliveri Inset or Island Bath is not installed by a licensed   
    plumber or qualified tradesperson, (as appropriate);

  •  your Oliveri Inset & Island Bath is not installed in    

 

    accordance with the recommended design guidelines or  

 

    installation instructions; and
  •  unauthorised modifications are made to your Oliveri Inset    
    or Island Bath.

Full details of exclusions and limitations are set out in the full 
Oliveri Warranty document available at: oliveri.com.au/service-and-
warranty-au

To the fullest extent permitted by law and subject to and without 
limiting your consumer rights under the Australian Consumer 
Law, Oliveri expressly limits its liability under this Oliveri Warranty 
and under any other statutory guarantee imposed at law to, at its 
option:
•  the replacement or repair of the Oliveri Inset or Island Bath;
•  the supply of an equivalent Oliveri Inset or Island Bath; or
•  the payment of the cost of the Oliveri Inset or Island Bath or of  
  repairing the Product or of acquiring an equivalent Oliveri Inset or  
  Island Bath.

To the fullest extent permitted by law, Oliveri expressly excludes:
•  all liability for damage or injury to any person;
•  damage to any Property;
•  loss of profit, loss of revenue, loss of use, loss of business,  

 

  loss of opportunity, loss of goodwill, loss of contracts, loss of    
  production, business interruption or any kind of indirect, special  
  or consequential loss or damage arising in connection with the  
  defective product; and
•  all conditions, warranties and undertakings in relation to the    
  Oliveri Inset or Island Bath except as set out in the full  

 

  Oliveri Warranty document available at oliveri.com.au/service-   
 and-warranty-au

SERVICE / WARRANTY CLAIMS

 

To make a warranty claim, please contact Oliveri by phone on: 
08 8348 6444 or by email: [email protected]

You must  

bear your own costs incurred in making a warranty claim.  

No specific claim form is required however the following 
documentation must be supplied as part of your claim:
•  proof of purchase;
•  handover documentation (for new homes);
•  your contact details, including the address of the installed Product; 
•  photo/s of your Product and the defect in question; and
•  details of the warranty claim including date of installation,  

 

  installer details, and description of the product fault.

Oliveri Solutions Pty Ltd

  

ABN 12 007 551 886

51 Naweena Rd, Regency Park SA 5010   
P  08 8348 6444   E  [email protected]

Reviews: