background image

AS AMERICA, INC. ONE YEAR LIMITED WARRANTY

If inspection of this AS America, Inc. (“American Standard”) plumbing product, within one year after its initial purchase, confirms that it is 

defective in materials or workmanship, American Standard will repair or, at its option, exchange the product for a same or similar model.
This limited warranty applies only to the original purchaser and installation of these products.  In the event of a limited warranty claim, proof 

of purchase will be required—save sales receipts.
This limited warranty does not apply to local building code compliance. Since local building codes vary considerably, the purchaser of this 

product should check with a local building or plumbing contractor to insure local code compliance before installation.
This limited warranty will be void if the product has been moved from its initial place of installation; if it has been subjected to faulty 

maintenance, abuse, misuse, accident or other damage; if it was not installed in accordance with American Standard's instructions; or if it 

has been modified in a manner inconsistent with the product as shipped by American Standard.
American Standard's option to repair or exchange the product under this limited warranty does not cover any labor or other costs of removal 

or installation including any costs of any surrounding material such as tile or marble. American Standard is not responsible for any other 

incidental or consequential damages attributed to a product defect or to the repair or exchange of a defective product, all of which are 

expressly excluded from the warranty. This limited warranty does not cover the extension beyond the duration of this limited warranty of any 

implied limited warranties, including those of merchantability or fitness for an intended purpose. (Some states or provinces do not allow the 

exclusion or limitation of implied warranties, so this exclusion may not apply to you.)
This limited warranty gives you specific legal rights. You may have other statutory rights that vary from state to state or from province to 

province, in which case this limited warranty does not affect such statutory rights.
For service under this warranty, it is suggested that a claim be made through the contractor or dealer from or through whom the product 

was purchased, or that a service request (including a description of the product model and of the defect) be sent to the following address:

2

730427-100 Rev. E

In the United States:

American Standard Brands,

P.O. Box 6820

Piscataway, New Jersey 08855

Attention: Director of  Consumer Affairs

For residents of the United States, warranty 

information may also be obtained by calling 

the following toll free number: (800) 442-1902

www.americanstandard.com

In Mexico:

Customer Service Manager 

AS Maquila, S.A. de C.V.

Via Morelos #330

Col. Santa Clara

Ecatepec 55540 Edo. Mexico

www.americanstandard.com.mx

THIS WARRANTY IS NOT TRANSFERABLE FROM ORIGINAL CONSUMER PURCHASER.

5

6

7

8

Steel Hanger

Mounting Screw

Positioning Screw

Anchor Screw

(if used)

Lavatory

Affix hanger to wall (hand tighten only). Mount 

lavatory for positioning, level the deck, and mark 

bottom anchor screw holes (if applicable). Remove 

lavatory, tighten the hanger positioning screws and 

drill pilot holes for anchor screws and 4 mounting 

screws. Install and tighten the mounting screws.

Return the fitted lavatory to 

the installed position. Connect 

trap to drain assembly hand 

tight to check alignment.  It 

may be necessary to cut off 

part of the tailpiece (area "B") 

or part of the horizontal leg of 

the trap (area "C").

Secure lavatory on 

hanger as shown in 

5

Insert and tighten anchor 

screws if applicable. 

Connect hot and cold 

supply lines to the 

shut-off valves. Tighten 

trap joints for watertight 

assembly. Apply a bead 

of caulk around the edge 

which contacts the wall 

as shown.

Following manufacturers instructions, install faucet 

and drain assembly.  (Not included). Be certain to 

apply a bead of sealing putty on the underside of 

the drain (Part "A") in order to ensure a watertight 

seal between the lavatory and drain. Remove 

excess putty after installing drain on lavatory.

B

C

A

Shut-off

Valves

Caulk

In Canada: 

AS Canada ULC

5900 Avebury Road

Mississauga, Ontario

Canada L5R 3M3

Toll Free: (800) 387-0369

www.americanstandard.ca

Reviews: