RECOMMENDED TOOLS AND MATERIALS
Putty Knife
Regular Screwdriver
Adjustable Wrench
Sealant
Tape Measure
Hacksaw
Wax Ring/Gasket
Flexible Supply Tube
Closet Bolts
Carpenters Level
1
REMOVE OLD TOILET
a. Close toilet supply valve and flush tank completely. Towel or sponge remaining water from tank and bowl.
b. Disconnect and remove supply line. NOTE:
If replacing valve, first shut off main water supply!
c. Remove old mounting hardware, remove toilet and plug floor waste opening to prevent escaping sewer gases.
d. Remove closet bolts from flange and clean away old wax, putty, etc. from base area.
NOTE:
Mounting surface must be clean and level
before
new toilet is installed!
S
A
VE FOR FUTURE USE
2
7302073-100 Rev. A
CAUTION: PRODUCT IS FRAGILE. TO AVOID BREAKAGE AND POSSIBLE INJURY HANDLE WITH CARE!
P r o d u c t n a m e s l i s t e d h e r e i n a r e t r a d e m a r k s o f A S A m e r i c a I n c .
© A S A m e r i c a I n c . 2 0 1 3
NOTE:
Pictures may not exactly define contour of china and components.
Thank you for selecting American Standard – the benchmark of fine quality for over 100 years. To ensure this product is installed
properly, please read these instructions carefully before you begin. (Certain installations may require professional help.) Also be
sure your installation conforms to local codes.
!
INSTALLATION INSTRUCTIONS
CARE AND MAINTENANCE
Colony
®
Two-Piece Toilet
221AA/221AB Series Colony Right Height
®
Elongated
221CA/221CB Series Colony Elongated
221DA/221DB Series Colony Round Front
ROUGHING-IN DIMENSIONS:
NOTE:
Distance from wall to closet flange centerline must be as listed on chart under ROUGH-IN DIMENSION “A”,
the BOWL HEIGHT is listed as DIMENSION “B”.
BOWL SHAPE
RIGHT HEIGHT
®
12" (305mm) 16-1/2" (419mm) 221AA 3251A 4192A
ELONGATED
10" (254mm) 16-1/2" (419mm) 221AB 3251A 4192B
ELONGATED
12" (305mm) 15" (381mm)
221CA 3251C 4192A
10" (254mm) 15" (381mm)
221CB 3251C 4192B
ROUND FRONT
12" (305mm) 15" (381mm)
221DA 3251D 4192A
10" (254mm) 15" (381mm)
221DB 3251D 4192B
ROUGH-IN
DIM. “A”
COMBO
MODEL
BOWL
MODEL
TANK
MODEL
BOWL HEIGHT
DIM. “B”
FINISHED WALL
FINISHED FLOOR
SUPPLY
AS
REQ'D.
A
B
B
