American National Manufacturing Static LAL 8100, User Instruction Manual, Page: 7 / 16

7 of 16
8100 LAL
Air Blower/Control Unit
and
True Low Air Loss Mattress with Cover
Unpacking and Set-up
Description of the Device:
The Static Low-Air-Loss Mattress Replacement System consists of a control unit, power cord, a Low Air
Loss Mattress and a waterproof, vapor permeable, easy-to-clean cover.
UNPACKING / PARTS BREAKDOWN:
Parts
- Air Blower/Control Unit
- Power Cord (Hospital Grade)
-
True Low Air Loss Mattress Replacement
-
Mattress Cover
Tools Required: NONE
Unpacking instructions:
Remove the products from the packing material and examine for shipping damage. If damage is detected
in shipping, contact the freight company and file a damage complaint immediately.
Environmental Conditions:
CAUTION: Keep out of direct sunlight.
DO NOT expose to temperatures greater than 95 degrees or below 40 degrees Fahrenheit.
DO NOT expose to moisture or areas of extreme humidity.
Portable and mobile RF communications equipment can affect Medical Electrical Equipment. The use of
Accessories, transducers, and cables other than those specified by the manufacturer, may result in
increased emissions or decreased immunity of the equipment or system.
The equipment or system should not be used adjacent to or stacked with other equipment and that if
adjacent or stacked use is necessary, the equipment or system should be observed to verify normal
operation in the configuration in which it will be used.
NOTE:
Some cellular telephones and similar devices transmit signals while they are ON, even when not
being used.
Directions for Mattress Placement:
Replace the existing bed mattress with True Low Air Loss Mattress. Secure Air Mattress to the bed frame
with straps provided.
Warning or Safety Instructions relating to setup:
WARNING: Make sure the power cord is plugged into a properly grounded A/C 110 Volt outlet.