American Megatrends Atlas III PCI User Manual Download | Manualshive

Page: 4 / 80

background image

Atlas PCI-III PCI Pentium ISA Motherboard User’s Guide

iv

Preface

To the OEM

Thank you for purchasing the high performance American Megatrends Atlas
PCI-III Pentium ISA motherboard. This product is a state of the art
motherboard that includes the famous AMIBIOS. It is assumed that you have
also licensed the rights to use the American Megatrends documentation for the
American Megatrends Atlas PCI-III motherboard

This manual was written for the OEM to assist in the proper installation and
operation of this motherboard. This manual describes the specifications and
features of the Atlas PCI-III motherboard. It explains how to assemble a system
based on the Atlas PCI-III motherboard and how to use the AMIBIOS that is
specifically designed for this motherboard.

This manual is not meant to be read by the computer owner who purchases a
computer with this motherboard. It is assumed that you, the computer
manufacturer, will use this manual as a sourcebook of information, and that
parts of this manual will be included in the computer owner's manual.

Disclaimer

AMI only certifies that this product will work correctly when this

product is used with the same jumper settings, the same system

configuration, the same memory module parts, and the same

peripherals that were tested by AMI with this product. The complete

list of tested jumper settings, system configurations, peripheral

devices, and memory modules are documented in the AMI

Compatibility Report for this product. Call your AMI sales

representative for a copy of the Compatibility Report for this product.

Technical Support

If you need help installing, configuring, or running this product, call American
Megatrends technical support at 770-246-8645. You can send questions to
technical support at:

[email protected].

Web Site

We invite you to access the American Megatrends world wide web site at:

http://www.ami.com

.

«
...
2
3
4
5
6
...
»

Summary of Contents for Atlas III PCI

















































































Reviews:

No comments

Related manuals for Atlas III PCI

Brand: JETWAY Pages: 52

Brand: Gigabyte Pages: 80

VIOTECH 3100 PLUS - BIOS

Brand: Biostar Pages: 41

Brand: Aaeon Pages: 108

Brand: Texas Instruments Pages: 26

Brand: Avalue Technology Pages: 29

Brand: Gigabyte Pages: 96

Brand: Pure Photonics Pages: 11

PROTO1 Xplained Pro

Brand: Atmel Pages: 17

Brand: Semtech Pages: 16

Brand: Global Pages: 33

Brand: Fujitsu Pages: 64

Brand: Abit Pages: 88

Brand: Thunder Pages: 2

Brand: MAX power Pages: 16

AIMB-763 Series

Brand: mATX Pages: 87

Brand: MattairTech Pages: 38

Brand: Dialog Pages: 12

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands