American Megatrends Atlantis Pentium II PCI ISA User Manual Download Page 48 | Manualshive

Page: 48 / 75

background image

Atlantis PCI Pentium II ISA Motherboard User’s Guide

44

Advanced Setup,

Continued

3rd Boot Device This option sets the type of device for the third boot drives that the AMIBIOS

attempts to boot from after AMIBIOS POST completes. The settings are
Disabled, Floppy, ARMD-FDD, ARMD-HDD, ATAPI, CDROM, 1

st

IDE-

HDD, 2nd IDE-HDD, 3

rd

IDE HDD, or 4

th

IDE-HDD. The default settings

are ARMD-HDD.

4th Boot Device This option sets the type of device for the third boot drives that the AMIBIOS

attempts to boot from after AMIBIOS POST completes. The settings are
Disabled, Floppy, ARMD-FDD, ARMD-HDD, ATAPI, CDROM, 1

st

IDE-

HDD, 2nd IDE-HDD, 3

rd

IDE HDD, or 4

th

IDE-HDD. The default settings

are Disabled.

Try Other Boot Devices Set this option to Yes to instruct AMIBIOS to attempt to boot from

any other drive in the system if it cannot find a boot drive among the drives
specified in the 1

st

Boot Device, 2

nd

Boot Device, 3

rd

Boot Device, and 4

th

Boot Device options. The settings are Yes or No. The Optimal and Fail-Safe
default settings are Yes.

System BIOS Cacheable When set to Enabled, the contents of the F0000h system memory

segment can be read from or written to cache memory. The contents of this
memory segment are always copied from the BIOS ROM to system RAM for
faster execution. The settings are Enabled or Disabled. The default settings
are Enabled.

Caching Controller Set this option to Present if a caching controller is installed in the

computer.

Setting

Description

Absent

(the

default

setting)

PCI adapter cards must be reset every time the CPU is reset. If you
press <Ctrl> <Alt> <Del>, only the CPU is reset. All soft resets are
converted to hard resets and all PCI adapter cards are reset when
the CPU is reset.

Present

Soft resets behave like soft resets. Select this option if a caching
controller is installed. Soft resets must not generate a hard reset
with a caching controller. If a hard reset is generated, a PCI caching
controller cannot flush data from cache memory to a hard disk drive
before the reset.

Cont’d

«
...
46
47
48
49
50
...
»

Summary of Contents for Atlantis Pentium II PCI ISA












































































Reviews:

No comments

Related manuals for Atlantis Pentium II PCI ISA

Brand: QDI Pages: 69

Brand: mikroElektronika Pages: 29

Brand: JETWAY Pages: 40

Brand: Sanela Pages: 30

970A-G46 Series

Brand: MSI Pages: 78

Brand: Intel Pages: 30

Brand: California Eastern Laboratories Pages: 34

Brand: Intel Pages: 73

Brand: Intel Pages: 10

Brand: SMSC Pages: 42

Brand: Texas Instruments Pages: 21

STEVAL-IHM011V1

Brand: ST Pages: 27

Brand: ASROCK Pages: 61

Brand: DG Pages: 18

Brand: SOYO Pages: 104

RouterBOARD 911 Lite5 ac

Brand: MikroTik Pages: 5

Brand: DFI-ITOX Pages: 129

Brand: LeMaker Pages: 11

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands