American Megatrends 62 Series User Manual Download Page 49

Page: 49 / 63

Baby Screamer LC Motherboard User's Guide

4 5

Hard Disk Utility

AMIBIOS includes three hard disk utilities:

U t i l i t y

P u r p o s e

T u r n t o

Hard Disk Format

Performs a low level format of the

hard drive(s). Read the system or hard

disk drive documentation to find out if

the hard disk has been preformatted.

Page 47

Auto Interleave

Determines the optimum interleave

factor and then performs a low level

format of the hard disk drive.

Page 49

Media Analysis

Analyzes each hard disk drive track to

determine whether it is usable. The

track is labeled bad if unusable.

Page 55

The hard disk utility error messages are described on page 52.

These routines work on drives that use the MFM, RLL, ARLL, or ESDI data recording techniques.

They do not work on IDE or SCSI

Disk Drives.

Warning

AMIBIOS Hard Disk Utilities destroy all hard disk data. Back up the data on the

hard disk before running this utility.

Summary of Contents for 62 Series
































































Search results

Summary of Contents for 62 Series

Reviews:

Related manuals for 62 Series

Brands by name

Popular brands

American Megatrends 62 Series, User Manual

Search results

Summary of Contents for 62 Series

Reviews:

Related manuals for 62 Series

Brands by name

Popular brands