Chapter 4 AMIBIOS Setup
3 4
3 4
Auto Configuration With Power-On Defaults
This option configures the Power-On default settings for all BIOS options. These are worst-case settings for system performance,
but are the most stable settings. Use this option as a diagnostic aid if the system is behaving erratically. Type
Y
and press <Enter> to
use the Power-On defaults. The following appears:
Default values loaded. Press any key to continue.
W r i t e t o C M O S a n d E x i t
W r i t e t o C M O S a n d E x i t
The features selected and configured in Standard Setup, Advanced CMOS Setup, and Password Setup are stored in CMOS RAM
when this option is selected. A checksum is calculated and written to CMOS RAM. Control is then passed to the BIOS. The following
appears:
Write to CMOS and Exit (Y/N)?
Press
N
and <Enter> to return to the Main Menu. Press
Y
and <Enter> to save the system parameters and continue the boot
process.
D o N o t W r i t e t o C M O S R A M a n d E x i t
D o N o t W r i t e t o C M O S R A M a n d E x i t
This option passes control to the ROM BIOS without writing any changes to CMOS RAM.
Press
N
and <Enter> to return to the Main Menu. Press
Y
and <Enter> to continue the boot process without saving any system
parameters.
