manualshive.com logo in svg

American-Lincoln SC7740, Operator'S Manual & Parts List, Page: 3 / 47

Share
Download
American-Lincoln SC7740 Operator'S Manual & Parts List Download Page 3

1-2

American-Lincoln

®

   SC7740

Dust Flaps, Checking The ................................................................................................................... 1-29
Dust Flaps, Adjusting The ................................................................................................................... 1-29

Neutral Adjustment ..................................................................................................................................... 1-30

Parking Brakes ................................................................................................................................... 1-30
Adjusting the Parking Brake Pedal ...................................................................................................... 1-30
Adjusting the Parking Brake ................................................................................................................ 1-30
Adjusting the Directional Pedal ............................................................................................................ 1-30

General Machine Maintenance ................................................................................................................... 1-31

Replacing the Scrub Brush .................................................................................................................. 1-31
Covers and Latches ............................................................................................................................. 1-31
Low Solution Warning Light ................................................................................................................. 1-31
High Recovery Light ............................................................................................................................ 1-31
Solution Control ................................................................................................................................... 1-31
Recycling Pump ESP System ............................................................................................................ 1-32
Recycling Pump Storage ..................................................................................................................... 1-32
Rear Squeegee ................................................................................................................................... 1-32
Squeegee Caster Wheels .................................................................................................................... 1-32
Casters, Adjusting The ........................................................................................................................ 1-32
Emptying The Recovery Tank .............................................................................................................. 1-33
Machine Storage ................................................................................................................................. 1-33
Checking Engine Oil Level ................................................................................................................... 1-34
Checking Engine OIl ............................................................................................................................ 1-34
Fan Belt Tension ................................................................................................................................. 1-34
Checking Spark Plugs ......................................................................................................................... 1-34
Drive Belt Tension Adjustment ............................................................................................................. 1-34
Cleaning/Changine the Fuel Filter ........................................................................................................ 1-35
Checking the Fuel Hoses .................................................................................................................... 1-35
 Valve Clearance .................................................................................................................................. 1-35
Air Cleaner .......................................................................................................................................... 1-35
Checking Water Level .......................................................................................................................... 1-36
Draining and Cleaning the Radiator ...................................................................................................... 1-36

LP Gas System ......................................................................................................................................... 1-37

LP Gas Vaporizer-Regulator Qick Check ............................................................................................. 1-37
LP Gas Fuel Tank ............................................................................................................................... 1-37
LP Liquid Withdrawal System ............................................................................................................. 1-37

Safety Warnings LP ................................................................................................................................... 1-38

LP Tank Components .......................................................................................................................... 1-39
LP Checklist ....................................................................................................................................... 1-39
LP Fuel Tank ....................................................................................................................................... 1-39
Use and Care of LP Tank ..................................................................................................................... 1-40
Changing LP Tank ............................................................................................................................... 1-40
Storing LP Fuel Tanks ......................................................................................................................... 1-40

ESP System Operating Instructions ........................................................................................................... 1-41

Scrubbing System - How It Works ....................................................................................................... 1-41
Non-Recycling Or Standard Scrubbing System - How It Works ........................................................... 1-41
ESP Recycling ON/OFF Switch (Option) ............................................................................................. 1-41
Recovery Or ESP System - How It Works ........................................................................................... 1-41

General Troubleshooting ............................................................................................................................. 1-42
Parts List Legend ....................................................................................................................................... 1-44
Ordering Parts ............................................................................................................................................ 1-45

Chapter 2 (Parts List)

Main Frame & Flaps ............................................................................................................................ 2-2
Main Frame & Flaps Cont. .................................................................................................................. 2-4
Cover-Hopper/Engine ........................................................................................................................... 2-6
Drive Wheel Assembly ........................................................................................................................ 2-8
Front Wheel ........................................................................................................................................ 2-10
Parking Brake ..................................................................................................................................... 2-12
Swing Squeegee Support .................................................................................................................... 2-14
Squeegee Lift ...................................................................................................................................... 2-16
Rear Squeegee (40”) ........................................................................................................................... 2-18

TABLE OF CONTENTS

Summary of Contents for SC7740
















































Reviews:

No comments