Interrupters User Guide
Chapter 5: Interrupter Programming
41
Figure 5-1. Connect to Unit
Configuring the Interrupter
Use Bullhorn Tools to complete the following configuration tasks on the unit:
l
— the main
Device Overview
window displays current unit
information, including Program settings, interruption settings, and battery data.
l
— units can be configured from a previously-saved template that
contains unit settings. Current unit settings are overwritten by the applied template.
l
Setting Up Interruption Options
— set interruption options, such as UTC Offset, Output Mode,
Sync Mode, and Zero Crossing.
l
Setting Up Interruption Programs
— create up to nine different interruption programs.
l
Setting Up an Interference Interruption Program
— set up interference mode with interruption.
l
— unit settings can be saved to a template to save time when
configuring multiple, identical units. Saved templates can be exported or deleted.
l
Resetting to Factory Defaults with Bullhorn Tools
— resets the unit to settings that were made
during manufacturing.
l
— when available, the unit firmware can be upgraded.
