Interrupters User Guide
Chapter 5: Interrupter Programming
35
Figure 5-4. Interference Program Screen 1
Figure 5-5. Interference Program Screen 2
The program then cycles through the set number of units shown at the bottom of the screen
(For example,
10
as shown in this example). When finished, the program begins again.
Figure 5-6. Interference Program Screen 3
7.
To cancel the program, press
PREV
. A cancellation confirmation screen displays.
Figure 5-7. Cancellation Confirmation Screen
8.
Press
ENTER
to cancel and return to main menu. If you do not press
ENTER
within a few
seconds, the program will continue.
Options Features
Other features, such as setting output parameters, changing UTC offset, using zero crossing, and
restoring factory defaults, are completed using the Options menu.
To display the Options menu:
