Interrupters User Guide
Chapter 3: GPS350 Installation
16
Figure 3-1. Relay Cables
3.
If interrupting the
AC power
, remove the tap change bar from the taps and connect both of
the interrupter's relay cables to the same tap settings that were connected by the change bar.
4.
If interrupting the
DC power
:
a.
Disconnect DC output cable.
b.
Connect one of the interrupter's relay cables to the output.
c.
Slide shrink wrap tube on to the other relay cable.
d.
Connect the DC output cable to the interrupter's relay cable.
e.
Wrap relay cables in shrink wrap to prevent shorting the equipment.
Figure 3-2. Relay and DC Output Cable in Shrink Wrap
