Intellex 4.30 Software Update 3 Release Notes
6
8200-2640-28 A1
Bosch IP Camera Support Update
The Bosch IP Camera Handler has been updated and certified to support the following models for
PAL and NTSC:
Table 2: Bosch IP Cameras Supported
The new Bosch IP Camera Handler also supports NWC-0455-10P.
In addition to the above, PTZ support has also been added for the Bosch VG4-500i camera
model range.
The Bosch VIP PE X1 Encoder has only been certified with non-PTZ Analogue Bosch Models
VDC-485V04-10P and VDC-485V04-20P Mini Dome cameras.
Note:
Intellex does not currently support Input or Output alarm functionality for Bosch cameras.
Bosch IP Camera Performance
Performance tests verify that 16 Bosch Cameras can be supported on an Intellex IP however with
a low frame rate (8FPS @ 4CIF on the IP PE R200) or a mix of different frame rates. On the
Intellex IP PE860 units this frame rate may be lower (7FPS @ 4CIF) To achieve high rates per
Bosch model the user must reduce the number of cameras connected to each Intellex IP.
Motion detection
Motion detection works best on the Intellex IP in bright light situations with clear distinctive
visibility conditions. It is therefore recommend that users increase the sensitivity levels on the
settings for day / night if motion detection is to be used.
Camera Handler
Firmware Version
NWC-0455-10P
3.52
NWC-0495-10P
3.52
NWC-0495-20P
3.52
NWD-495V03-10P
3.52
NWD-495V03-20P
3.52
VG4-500i-10P
VG4 Service Pack, Version 1.07
VG4-500i-20P
VG4 Service Pack, Version 1.07
VIP PE X1 Encoder PAL
2.53
VIP PE X1 Encoder NTSC
2.53
