Intellex 4.30 Software Update 3 Release Notes
5
8200-2640-28 A1
Centering Video images
Some VideoEdge camera models require a slight configuration change to perfectly centre the
video image within the viewing window, these are: ADCIPE3712OCPE; ADCIPEBPN;
ADCIPE3712OCN and ADCIPE3312ICPE. It is necessary to make a manual adjustment via the
camera web GUI to centre the image by adjusting the 'CCD X shift' to a value of 20.
In addition, on model ADCIPE3312ICPE the bottom of the image will also require the 'CCD Y
shift' adjustment to a value of 20; this is carried out via on the camera GUI web page.
To do this:
1. Log into the camera web GUI and append "/svideo.htm" to the camera USRL - e.g.
http://192.168.188.242/svideo.htm
, see Figure 1.
Figure 1: Camera Login Screen
2. Enter the CCD X shift and CCD Y shift, if required for your camera model.
3. Click Submit. This will save and store the new configuration for that camera stream.
Network Interface Driver Updates
When streaming large amounts of video data from multiple VideoEdge cameras some data
packets can get lost, causing occasional loss of video images. To help prevent this, we
recommend that the Intellex IP R200 and the PE860 Ethernet card drivers are updated to the
Windows XP version 12.2.2.0.
These drivers can be obtained from the American Dynamics Intellex 4.3 Software Update 3 web
site for download go to
http://americandynamics.net/support/downloads_20100301_Intellex_v43_Patch.aspx
.
