background image

SPEEDDOME ULTRA VIIE DAY/NIGHT CAMERA DOME CONFIGURATION UTILITY 

8200-0184-12, REV. A 

OPERATOR’S MANUAL SUPPLEMENT 

14 of 15

 

Mechanical 

Height ...........................................................20.8cm (8in) 
Eyeball Diameter ..........................................12cm (4.7in) 
Weight: 

Housing and Eyeball ...............................1.36kg (3 lbs) 
Base (standard).................................. 0.09kg (0.20 lbs) 
Base (with I/O board) ......................... 0.16kg (0.35 lbs) 

Lens and Bubble Densities 

Eyeball Lens ..................................................................f0 
Bubbles: 

RUCLR (Clear)...........................................................f0 
RUSLV (Silver)........................................................f2.0 
RUSMK (Smoke).....................................................f1.0 
RUGLD (Gold).........................................................f2.0 

Specifications

 

23X Day/Night Camera 

Type............................. Interline transfer 1/4in CCD array 
Scanning Area ................................. 3.2 (H) x 2.4 (V) mm 
Scanning System.......................................... 2:1 interlace 
Video Out............................ 1.0 Vp-p/75 ohms composite 
Signal-to-Noise ..........................................50 dB (typical) 
Horizontal Resolution.......................... 470 lines at center 
Minimum Illumination ........ 0.5 lux (AGC On, 20 IRE) 
 

0.03 lux with 1/4 s open shutter 

 

0.01 lux in IR mode 

 

0.009 lux in IR mode with 1/4 s open shutter 

White Balance ........................... Through-the-Lens (TTL) 
 Automatic 

Tracing 

 White 

balance 

(ATW) 

NTSC: 

Effective Pixels ........................... 724 (H) x 494 (V) pixels 
Scanning........................... 525 lines, 60 fields, 30 frames 
Horizontal ....................................................... 15.734kHz 
Vertical.................................................................. 59.9Hz 

PAL: 

Effective Pixels ........................... 724 (H) x 582 (V) pixels 
Scanning........................... 625 lines, 50 fields, 25 frames 
Horizontal ....................................................... 15.625kHz 
Vertical..................................................................... 50Hz 

Lens Design 

Type ................................................................ Aspherical 
Focal Length ............................................. 3.6 to 82.8mm 
Aperture .................................................f1.6 (wide angle) 
 f3.7 

(telephoto) 

Viewing Angle (equivalent to 8-80 mm on 1/2" CCD 
array, or 11-110 mm on 2/3" CCD array): 
3.6mm ................................................54.0°(H) x 40.5°(V) 
82.8mm ..................................................2.5°(H) x 1.9°(V) 

Field-of-View Formulas: 

3.2mm* x distance from camera (m) 

Focal length (mm) 

=   Horizontal view (m) 

2.4mm** x distance from camera (m) 

Focal length (mm) 

=   Vertical view (m) 

 

*  Horizontal scanning area of pickup device (mm) in camera. 
**  Vertical scanning area of pickup device (mm) in camera. 

Example:

 Wide angle view with lens at 6mm and viewed 

object at 10m. 

3.2mm x 10m 

6mm 

=   5.33m Horizontal view (m) 

2.4mm x 10m 

6mm 

=   4.0m Vertical view (m) 

 

Summary of Contents for SpeedDome Ultra VIIE
















Reviews: