American Dynamics SpeedDome Ultra VII, Operator'S Manual, Page: 63 / 114

Configuring Text Displayed On-Screen 5-9
Changing the Display of Selected Name Information
1. Select On-Screen Text Display from the Dome Configuration Menu .
2. Move the highlight to Name Configuration Menu and select.
The Name Configuration Menu appears.
3. Move the highlight bar to the item whose display setting you want to change.
4. Change the setting.
• Choose On to display name information on the monitor.
• Choose Off to prevent name information from appearing on the monitor.
The default settings are Off for Camera, Areas, Presets, and Patterns, and
On for Alarms.
5. Repeat steps 3 and 4 for each item you want to change.
6. Do one of the following:
• To reset all programmable names to their default values, select Reset
Programmable Names . Continue with step 7.
• If you do not want to reset the programmable names, continue with step 8.
7. The following prompt appears on the screen:
RESET PROGRAMMABLE NAMES NO
• To reset all names to the default value, select Yes . The Name Configuration Menu
displays.
“ Programmable Names Have Been Reset ”
appears at the bottom of the
screen.
•
To cancel resetting of names, select
No
. The
Name Configuration Menu
displays.
The default selection is No.
8. Do one of the following:
•
To change programmable name information continue with Assigning or Changing
Name Information on page 5-10.
•
To return to the
On-Screen Text Display
settings screen select
Exit
. Continue with
step 9.
9. Select Exit . The Dome Configuration Menu appears. Continue with What To Do Next
on page 5-14.