manualshive.com logo in svg

American Dynamics SpeedDome Ultra VII, Operator'S Manual, Page: 52 / 114

Share
Download
American Dynamics SpeedDome Ultra VII Operator'S Manual Download Page 52

4-18 

SpeedDome Ultra VII Operator's Manual

 

Hiding Privacy Zones 

If you want to temporarily disable the appearance of Privacy Zones, you may “hide” them. 
This allows you to keep the Privacy Zones that have been programmed while disabling their 
appearance on-screen. 

To hide all Privacy Zones: 

1. Select 

Alarms/Areas/Home/Presets/PZ 

from the 

Dome Configuration Menu

. 

2. Select

 Privacy Zones

.  

  

The 

Program Privacy Zones

 screen displays. 

3. Select 

Hide All Zones

. Change the setting.  

• 

Select 

Yes

 to hide all Privacy Zones. 

• 

Select 

No

 to make all Privacy Zones active.  

The default setting is No. 

4. Select 

Exit

 to return to 

Alarms/Areas/Home/Presets/PZ 

screen.  

5. When 

the 

Alarms/Areas/Home/Presets/PZ 

screen appears, select 

Exit

. The 

Dome 

Configuration Menu

 appears. Continue with 

What To Do Next

 on page 4-20.  

Programming Presets 

If you need to view specific places routinely, you should program presets. A 

preset

 is a 

programmed video scene with automatic pan, tilt, zoom, focus and iris settings. Once 
programmed, entering the number and pressing a button on your controller automatically 
calls up the preset. In addition, presets may be assigned to alarm actions or as the “home” 
position for the dome. As many as 96 presets, whose positions are saved in the dome’s 
firmware, may be programmed.  

VM96 and AD matrices installed as RS-422 and SensorNet networks support “virtual views.” 
This means that the pan, tilt, zoom, focus, and iris settings are stored within the controller, not 
the dome. You cannot use the “virtual views” that you define on those systems as the home 
position or an alarm action. You must use the presets programmed using this utility. 

AD168 matrices with an AD168CCM control code module support Manchester, RS-422, and 
SensorNet networks and provide 64 “virtual views.” All other AD matrices support 
Manchester and 64 dome presets or, through the use of an AD2083-02A code unit, RS-422 
networks and provide 16 “virtual views.” 

Summary of Contents for SpeedDome Ultra VII



















































































































Reviews:

No comments