SETUP
TRACE FADE RATE
OUTPUT BAUD RATE
The TRACE FADE RATE parameter establish the rate at
The OUTPUT BAUD RATE parameter sets the baud rate for
which the Detection Trace dots (see Detection Trace, page 6)
communication
a Matrix Switcher/Controller
fade through eight levels of intensity to the normal cell
via the RS-232 Output port (page 2). There are four settings
intensity. There are three settings for TRACE FADE RATE:
for baud rate:
or 9600.
FAST, provides a rapid fading of the dot intensity
(approximately
second),
MED, provides tbe default trace fade rate (approximately 2-
1/4
seconds),
The default setting for OUTPUT BAUD RATE is 1200 baud.
To change the baud rate:
SLOW, provides a slow fading of the dot intensity
(approximately
seconds).
1. Move the cursor to the OUTPUT BAUD RATE line.
2. Press the
or RIGHT button to cycle the baud rate
values until the desired rate is displayed.
The default setting of TRACE FADE RATE is MED. To
change the fade rate:
Note: This baud rate must be set to match the baud rate of the
RS-232 port on the switcher/controller that the
is connected to.
1. Move the cursor to the TRACE FADE RATE line.
2. Press the LEFT or RIGHT button to cycle the values until
the desired Trace Fade rate is displayed.
‘AD’ CONTACT GROUP
When all system modes and parameters are set as desired in
the Set System Parameters menu, press the MENU button to
exit to the Main Menu.
The ‘AD’ CONTACT GROUP specifies the group of Alarm
Contact Numbers for alarm codes transmitted to Matrix
Controllers (see AD Contact Group, page 6). There are 16
Alarm Contact Group values, A through P (shown in the table
below). The ‘AD’ CONTACT GROUP setting applies to
video channels.
The default setting of ‘AD’ CONTACT GROUP is A. To
change the contact group:
Move the cursor to the ‘AD’ CONTACT GROUP line.
2. Press the LEFT or RIGHT button to cycle the letters until
the desired Contact Group letter is displayed.
AD Contact
A
B
C
D
E
F
G
H
1
J
K
L
M
N
0
P
ACN Range
1 64
65 -128
129 192
193 -256
257-320
321 -384
385 -443
512
513 576
577-640
641 704
705 -768
769-832
833 896
897 960
961 1024
8
