American Dynamics ControlCenter ADCC1100 Installation And Operation Instructions Manual Download Page 42

Page: 42 / 60

ADCC1100

Program Mode

Macros

Operator

Dis’bl

All

Enable

All

Enable

One

Dis’bl

One

Enter

Cameras

Monitors

PTZ Control

To Partition Cameras:
Cameras can be enabled or disabled individually, or all at once.

1. To disable a single camera, press the CAMERAS soft key to highlight the icon.

2. Enter the number of the camera from the alphanumeric keys, then press the

DIS'BL ONE soft key.

3. To disable all cameras, press the CAMERAS soft key to highlight the icon.

4. Press the DIS'BL ALL soft key.

5. To enable a single camera, press the CAMERAS soft key to highlight the icon.

6. Enter the number of the camera from the alphanumeric keys, then press the

ENABLE ONE soft key.

7. To enable all cameras, press the CAMERAS soft key to highlight the icon.

8. Press the ENABLE ALL soft key.

To Partition Monitors:

Monitors can be enabled or disabled individually, or all at once.

1. To disable a single monitor, press the MONITORS soft key to highlight the icon.

2. Enter the number of the monitor from the alphanumeric keys, then press the

DIS'BL ONE soft key.

3. To disable all monitors, press the MONITORS soft key to highlight the icon.

4. Press the DIS'BL ALL soft key.

Figure 4.6: Partition Menu

All manuals and user guides at all-guides.com

Summary of Contents for ControlCenter ADCC1100





























































Search results

Summary of Contents for ControlCenter ADCC1100

Reviews:

Related manuals for ControlCenter ADCC1100

Brands by name

Popular brands

American Dynamics ControlCenter ADCC1100, Installation And Operation Instructions Manual

Search results

Summary of Contents for ControlCenter ADCC1100

Reviews:

Related manuals for ControlCenter ADCC1100

Brands by name

Popular brands