113068 - 10
www.amdry.com
13
c. Load Door Piston Lines
The load door cylinder pneumatic connections are made in the lower heat console section, in the area
behind the pneumatic panel. To connect the 1/4” poly-flo tubing into the corresponding needle valves,
match the number on the line with the number on the needle valve. Insert
ALL
of the tubing (two [2]
on a 1-door model, four [4] on a 2-door model) into their corresponding valves. Give a moderate pull on
ALL
of the air lines to make sure that the connections are complete.