background image

ADC Part No. 113574

4 - 01/24/17

Warranty Information _____________________

For any warranty-related issues, please contact our Warranty
Department at +1 (508) 678-9000.

If you need a copy of the warranty covering your dryer please
contact the reseller who sold you the equipment. If the reseller
cannot be contacted then call our Warranty Department.

Before calling, please have the dryer model and serial number
(from rating plate) and the installation date of the dryer.

The rating plate can be found behind the control panel on some
dryers and inside the back guard on other dryers.

All warranty claims or inquiries should be addressed to our
Warranty Parts Department. To expedite warranty claim, please
follow these procedures:

Do not ship any part to us without proper authorization (Return
Material Authorization or R.M.A.) from the factory. An R.M.A. is
only valid for 30 days.

Ship the failed component, a copy of the R.M.A., and any other
supporting documentation.

Label or tag each part with the model and serial number (from
the rating plate) of the dryer it was removed from. Warranty
tags (Part No. 450064) are available (no charge) from ADC.

Describe the nature of the failure (be specific).

Provide the date that the dryer was installed.

Provide the date when the component failed.

Specify if the part is being returned for a credit, replacement,
or refund. If a part is marked for a credit or a refund, please
provide the invoice number of the replacement part purchase.

You must clearly note your company’s complete name and
address on the outside of the package.

All returns should be shipped to the factory with adequate
insurance and “proof-of-delivery” from the shipping company.

No replacements, credits, or refunds will be issued for
components damaged during transit. All returns must be
properly packaged to prevent such damage, and any claims
are the responsibility of the shipper.

Shipping charges are your responsibility. Any C.O.D. or “Collect”
shipments will be refused.

You will be notified if your warranty claim cannot be processed
due to insufficient or missing information. We must receive this
information within 30 days otherwise the claim will be rejected
and the part will be discarded.

For your convenience, log the following information:

 Date of Purchase: ________________________________

 Model Number: __________________________________

 Reseller's Name: _________________________________

 Serial Number: ___________________________________

_______________________________________________

This product embodies advanced concepts in engineering,
design, and safety.  If this product is properly maintained, it will
provide many years of safe, efficient, and trouble-free operation.

We have tried to make this manual as complete as possible
and hope that you will find it useful.  The manufacturer reserves
the right to make changes from time to time and without notice
or obligation.  The illustrations included in this manual may not
depict your particular dryer exactly.

The appliance has been tested to the relevant Low Voltage
Directives.

  NOTES ______________________________________________________

_____________________________________________________________

_____________________________________________________________

_____________________________________________________________

_____________________________________________________________

_____________________________________________________________

_____________________________________________________________

_____________________________________________________________

_____________________________________________________________

_____________________________________________________________

_____________________________________________________________

_____________________________________________________________

_____________________________________________________________

_____________________________________________________________

_____________________________________________________________

_____________________________________________________________

Summary of Contents for AD-30x2













Reviews: