background image

©American DJ®  Los Angeles, CA 90058 USA - Specifications are subject to change without notice.

X-Treme™ User Instructions page 1

American DJ

®

User Instructions

• 9  Dichroic Colors plus White
• 8 Gobos plus Spot on separate wheel
• 360 degree rotation of Gobo and Color Wheels
• DMX-512 Protocol
• Controlled by the X-Treme/19C™ or X-Treme/C™ Basic Controller

   X-Treme™ Features

The X-Treme™ intelligent lighting fixture features 9 rich dichroic colors plus white, 9 gobos plus spot, separate gobo/

color wheels, strobes in every color, and a 300 hour long life 250W lamp. 360 degree rotation of gobo & color wheels 

with  speed  control  provide  a  X-treme™  lighting  show  for  club,  concert,  and  mobile  use.  DMX-512  protocol.  Fan 

cooled. Also  available  in  220V  operation.  Controlled  by  the  X-Treme/19C™  or  X-Treme/C™. The  X-Treme/19C™: 

Programmable controller with 64 channel DMX-512 output; Ergonomic joystick control of pan/tilt motion; 56 profession-

ally designed pan/tilt motions; 6 Show memories of 300 steps; Show memories can be chased for long concerts; Instant 

manual override and control of all projectors and functions; Built-in gobo & color chases; and Quick, intuitive modular 

programming.  Control  up  to  16  heads.  120V  or  220V  operation.  3  space,  19  in.  rack  mount.  The  X-

Treme/C™:  A  basic  controller  that  operates  blackout;  built-in  programs;  gobo/color  change; 

speed  control  of  gobo/color  wheels;  and  strobing.  Control  up  to  8  heads.  120V  or  220V  operation. 

   X-Treme™ Description

Voltage: 120V 50/60 Hz

Dimensions: 22.75” x 9” x 6.5” / 740mm x 293mm x 212mm

Lamp: ZB-EVC 250W 24V,  300 hour lamp life 

Weight: 27 lbs. / 12.3 kg.

Fuse: 5A

   X-Treme™ Specifications

HALOGEN LAMP WARNING!

This fixture is fitted with a halogen lamp 

which is highly susceptible to damage if 

improperly  handled.  Never  touch  lamp 

with  bare  fingers  as  the  oil  from  your 

hands will shorten lamp life. Also, never 

move  fixture  until  lamp  has  had  ample 

time to cool. Remember, lamps are not 

covered under warranty conditions.

Thank you for purchasing this American DJ® product.  Some  assembly required. 
Please read the following instructions before installing or using your new unit.

X-Treme

 

INTELLIGENT LIGHTING FIXTURE

Summary of Contents for X-Treme

Page 1: ...of 300 steps Show memories can be chased for long concerts Instant manual override and control of all projectors and functions Built in gobo color chases and Quick intuitive modular programming Control up to 16 heads 120V or 220V operation 3 space 19 in rack mount The X Treme C A basic controller that operates blackout built in programs gobo color change speed control of gobo color wheels and stro...

Page 2: ...ow enough space on all sides for proper cooling 4 Connect IEC power cord to back of unit 5 Plug cord into property grounded socket Check that the voltage marked on the back of unit is correct for your area 6 Lamp will light and unit will reset and wait for signal from controller The shutter is closed in stand by mode so it will be difficult to tell if the lamp is lit without a controller Unit may ...

Page 3: ...ng 3 pin XLR data cables 3 Set the DMX address for each fixture using the 9 pin DIP switch on the back panel fixture Each fixture uses 4 DMX 512 channels CH1 Color CH2 Gobo 1 CH3 Pan CH4 Tilt You must select the proper DMX 512 address for each X Treme projector Below Is a chart of standard addressing for use with the X Treme C X Treme 19C controllers DIP switch setting Projector DIP switch setting...

Page 4: ...Function Function 3 On Inverts the Pan motion Useful when projectors are mounted head to head to allow the Mirrors to move in unison Function 4 On Inverts the Tilt motion Useful when projector are mounted head to head to allow the mirrors to move In unison Function 5 On X Treme automatically runs through all the features one at a time So you can see every gobo and color and pan tilt motion Used wh...

Reviews: