Creating a Concert
This is a very useful way to create complex programs or rearrange the sequence of a large show
1. Select more than one
Show
,(3)The first Show LED will blink. When that Show has
finished running, the LED will stop blinking.
2. The
X-TREME 19C
automatically starts the next Show. LED will blink until show is finished.
3. The
X-TREME 19C
will continue this cycleuntil all shows are played.
4. You can add or remove Shows from the concert whenever you like.
TIPS
1. The secret to good programming are the
Speed
(14) and
Rate
(13) settings. Too much dead
time?
Rate is too slow and/or speed is too fast. Not enough time to finish motion before next step?
Rate is too fast and/or speed too slow. To start, set the rate low (near 0), and set the speed
high (near 8 or 9).
2. To help get the perfect speed setting during programming, listen to music with the same BPM
(beats per minute) as what you will be using in your shows.
3. After you have finished your show, go back and adjust the rate control for each step to get it
perfect.
4. For overlay effects, select a motion while a show is running, and
X-TREME 19C
will merge the
pre-programmed show with the added motion to create some stunning effects.
Experiment to find the wildest variations of your pre-programmed shows to use in real time
during a concert.
5. Save a few short one or two scene shows in Shows 1,2,3. When DJing, just press all three
and let them chase. For spontaneous spice, hit a manual key to synch all the colors, or all the
gobos, or the shutters.
6. In one of the
Shows
, save a "focus" (all the projectors in a static position). Press this Show to
get attention or add emphasis during a concert. A high-
impact move.
7. Use the
Up
and
Down
(8) keys to skip or force the next step while running a Show.
© American DJ® Los Angeles, CA. 90058 - X-Treme/19C™ User Instructions Page 7
User Instructions - X-Treme/19C™
American DJ
®
